Fall Prep

Everything to get your chimney, fireplace or stove ready for heating season: creosote removers, brushes and rods, crown and flashing sealants, water repellent and the all-in-one Leak Repair Kit.

Skip to results list

Active filters:

16 items
Column grid
Column grid

Filter

Active filters:

How to measure

Measure carefully and compare your numbers to the size chart on each product.

Still not sure? Contact us

Full Description

Late summer and early fall are the best time to get a chimney ready for the burning season. Repair products need dry, mild weather to cure, chimney sweeps aren't booked solid yet, and you'll find problems before the first cold night instead of during it. The Fall Prep collection gathers the most-needed maintenance supplies in one place.

Fall chimney checklist

  1. Schedule an inspection, or check the flue with a flashlight for soot and creosote buildup.
  2. Sweep the flue and smoke chamber; treat glazed creosote with a remover first.
  3. Make sure the cap is secure and its mesh isn't clogged or damaged.
  4. Open and close the damper to confirm it seals.
  5. Inspect the crown for cracks and the flashing for gaps, and seal them.
  6. Check stove door and glass gaskets, and replace any that are flattened or loose.
  7. Test smoke and carbon monoxide detectors.

Frequently asked questions

How do I get my chimney ready for fall?

Inspect, sweep if needed, check the cap and damper, seal any crown cracks or flashing gaps, and replace worn gaskets. Finish repairs before the weather turns cold and wet so sealants can cure.

When should I clean my chimney before winter?

Late summer or early fall, before regular burning starts. That leaves time to fix anything the cleaning uncovers, and sweeps get busy once cold weather arrives.

What does a creosote remover do?

It chemically changes hard or glazed creosote into a dry, flaky residue that brushes can remove. It's used alongside sweeping, not instead of it.

Can I seal a chimney crown in cold weather?

Most crown sealants need temperatures above about 40°F and a dry 24 to 48 hours to cure. Check the product label and plan the job for a mild, dry stretch.

What's in the Leak Repair Kit?

It bundles the most common products for fixing chimney leaks at the crown, flashing and brick, so you can handle typical water problems in one order. See the product page for exact contents and coverage.

Need more? Shop cleaning tools and masonry repair.